View AZ10100EP16VSLG_7264911.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.azmicrotek.com 1630 s stapley dr, suite 127 +1 - 480- 962- 5881 mesa, az 85204 usa r equest a sample may 2012, rev 2.0 d escription the az10/100ep16vs is a silicon germanium (sige) differential receiver with variable output swing. the az10/100ep16vs has functionality and output transition times similar to the az10/100ep16, with an input that controls the amplitude of the q/ q outputs. the az10/100ep16vs is functionally equivalent to the on semi mc100ep16vs b lock d iagram f eatures ? silicon - germanium for high - speed operation ? 150ps typical propagation delay ? available in a 3.0x3.0mm mlp package a pplications ? interfacing with very high frequency sources p ackage a vailability ? msop 8 ? mlp16 ? green/rohs compliant/pb - free az 10/ 100 ep16 vs lv pecl differential receiver with variable output swing order number package marking az10ep16vstg 1 msop8 aztpep16vs 2 az100ep16vstg 1 msop8 azhpgep16vs 2 az10/100ep16vslg 1 msop16 azmg16s 2 1 tap e & reel - add 'r1' at end of order number for 7in (1k parts), 'r2' (2.5k) for 13in 2 see www.azmicrotek.com for date code format www.azmicrotek.com
arizona microtek, inc. az 10 /100 ep16 vs ecl/ pecl differential receiver with variable output swing www.azmicrotek.com +1 - 480- 962- 5881 2 r equest a sample may 2012, rev 2.0 p in d escription and c onfiguration table 1 - pin description pin name type function 1 v ctrl input output swing control 2 d input data input 3 d input data input 4 v ref output reference voltage output 5 v ee power negative supply 6 q output data output 7 q output data output 8 v cc power positive supply msop8 8 7 6 5 1 2 3 4 v ctrl d d v cc q q v ee v ref 16 13 15 14 5 8 6 7 4 1 3 2 8 12 10 11 mlp16 v ctrl d d v ref nc nc nc nc nc v cc q q v ee 100k 10k boost figure 1 - pin configuration for msop 8 and mlp16 note s for mlp16 package: 10k/100k selection - connect pin 10k to v ee and float (nc) pin 100k to select 10k operation. connect pin 100k to v ee and float (nc) pin 10k to select 100k operation. variable swing selection - connect pin boost to v ee to support variable swing operation. float (nc) pins , boost and v ctrl to disable variable swing operation. all v ee connections must be less than 1 ? .
arizona microtek, inc. az 10 /100 ep16 vs ecl/ pecl differential receiver with variable output swing www.azmicrotek.com +1 - 480- 962- 5881 3 r equest a sample may 2012, rev 2.0 e ng ineering n otes connecting the boost pin to v ee increases the output swing by about 15% above standard ecl/pecl levels. the boost pin is internally tied to v ee for the msop8 package, and is under external user control for the mlp16 package. when both the boost pin and the v ctrl pin are not connected, the part operates with the standard ecl/pecl output and v bb levels of the az10/100ep16 device. to ensure best per formance, the boost pin should be tied to v ee when the variable swing feature is used. the operational range of the az10/100ep16vs control input, v ctrl , is from v ref (full swing) to v cc (min. swing). maximum swing is achieved by leaving the v ctrl pin open or tied to v ee . simple control of the output swing can be obtained by a variable resistor between the v ref and v cc pins, with the wiper driving v ctrl . typical application circuits and results are shown in figures below. the az10/100ep16vs provides a v ref (v bb /v ref ) output for a dc bias when ac coupling to the device. the v ref pin should be used only as a bias for the az10/100ep16vs as its current sink/source capability is limited. whenever used, the v ref pin should be bypassed to ground via a 0.01 f capaci tor. under open input conditions for d/ d , the q/ q outputs are not guaranteed. note: specifications in ecl/pecl tables are valid when thermal equilibrium is established. figure 2 - az10 /100 ep16 vs large signal performance *measured using a 750mv differential input source at 50% duty cycle. valid for msop8 or mlp16 with boost = v ee typical large signal performance, az100ep16vs* 0 100 200 300 400 500 600 700 800 900 1000 0 1000 2000 3000 4000 5000 6000 frequency (mhz) v outpp (mv) v ct rl =v cc v ct rl =v cc -2.0v v ct rl =v cc -1.5v v ct rl =v cc -1.0v v ct rl =v cc -0.5v
arizona microtek, inc. az 10 /100 ep16 vs ecl/ pecl differential receiver with variable output swing www.azmicrotek.com +1 - 480- 962- 5881 4 r equest a sample may 2012, rev 2.0 figure 3 - typical az10/100ep16vs voltage output swing at nominal conditions figure 2: alternative implementation v cc d q q d v ctrl 50 -2 v 50 figure 1: voltage source implementation v cc d v ee q q d + 3 . 3v 1k v swing ( pk- pk) 240 240 v ctrl v ref v swing ( pk- pk) v ee - 3 . 3v figure 4 typical applications 1.240 v (100k ecl) 0 25 50 75 100 0.0 0.4 0.8 1.2 1.6 v swing (% pk - pk differential) v ctrl (v) (boost tied to v ee for mlp 16, or mssop 8 package) typical az100ep16vs voltage output swing at +25c, nominal supply %out 100k ecl
arizona microtek, inc. az 10 /100 ep16 vs ecl/ pecl differential receiver with variable output swing www.azmicrotek.com +1 - 480- 962- 5881 5 r equest a sample may 2012, rev 2.0 p erformance data table 2 ? absolute maximum ratings absolute maximum ratings are those values beyond which device life may be impaired. symbol characteristic condition rating unit v cc pecl power supply v ee = 0v 0 to +4.5 v v i pecl input voltage v ee = 0v 0 to +4.5 v v ee ecl power supply v cc = 0v - 4.5 to 0 v v i ecl input voltage v cc = 0v - 4.5 to 0 v i out output current continuous 50 ma surge 100 t a operating temperature range - 40 to +85 c t stg storage temperature range - 65 to +150 c esd hbm human body model 2500 v esd mm machine model 200 v esd cdm charged device model 2500 v table 3 - 10k ecl dc characteristics 10k ecl dc characteristics (v ee = - 3.0v to - 3.6v, v cc = gnd) symbol characteristic - 40 c 0 c 25 c 85 c unit min typ max min typ max min typ max min typ max v oh output high voltage 1 - 1095 - 845 - 1055 - 805 - 1030 - 780 - 970 - 720 mv v ol output low voltage 1,2 vcrtl = vref. boost =vee - 2000 - 1700 - 2000 - 1690 - 2000 - 1690 - 2000 - 1655 mv v ol output low voltage 1,2 vcrtl = vcc. boost =vee - 1285 - 1035 - 1270 - 1020 - 1265 - 1015 - 1255 - 1005 mv v ol output low voltage 1,3 vcrtl = nc. boost =nc - 1950 - 1650 - 1950 - 1630 - 1950 - 1630 - 1950 - 1595 mv v ref reference voltage 2 boost=vee - 1700 - 1500 - 1670 - 1470 - 1650 - 1450 - 1600 - 1400 mv v ref reference voltage 3 boost=nc - 1430 - 1300 - 1380 - 1270 - 1350 - 1250 - 1310 - 1190 mv i ih input high current - d 80 80 80 80 v v ctrl 400 0.5 400 0.5 400 0.5 400 a i il input low current 0.5 0.5 0.5 0.5 a i ee power supply current 21 27 36 22 28 37 22 29 38 24 30 40 ma 1 each output is terminated through a 50 ? resistor to v cc - 2v 2 boost is internally bonded to v ee for the msop8 packages 3 supported in mlp16 package only
arizona microtek, inc. az 10 /100 ep16 vs ecl/ pecl differential receiver with variable output swing www.azmicrotek.com +1 - 480- 962- 5881 6 r equest a sample may 2012, rev 2.0 table 4 ? 10k pecl dc characteristics 10k lvpecl dc characteristics (v ee = gnd, v cc = +3.3v) symbol characteristic - 40 c 0 c 25 c 85 c unit min typ max min typ max min typ max min typ max v oh output high voltage 1,2 2205 2455 2245 2495 2270 2520 2330 2580 mv v ol output low voltage 1,2,3 vcrtl = vref. boost =vee 1300 1600 1300 1610 1300 1610 1300 1645 mv v ol output low voltage 1,2,3 vcrtl = vcc. boost =vee 2015 2265 2030 2280 2035 2285 2045 2295 mv v ol output low voltage 1,3,4 vcrtl = nc. boost =nc 1350 1650 1350 1670 1350 1670 1350 1670 mv v ref reference voltage 3 boost=vee 1600 1800 1630 1830 1650 1850 1700 1900 mv v ref reference voltage 4 boost=nc 1870 2000 1920 2030 1950 2050 1990 2110 mv i ih input high current - d 80 80 80 80 a v ctrl 400 0.5 400 0.5 400 0.5 400 a i il input low current 0.5 0.5 0.5 0.5 a i ee power supply current 21 27 36 22 28 37 22 29 38 24 30 40 ma 1 for supply voltages other than 3.3v, use the ecl table values and add supply voltage value 2 each output is terminated through a 50 ? resistor to v cc - 2v 3 boost is internally bonded to v ee for the msop8 packages 4 supported in mlp16 package only
arizona microtek, inc. az 10 /100 ep16 vs ecl/ pecl differential receiver with variable output swing www.azmicrotek.com +1 - 480- 962- 5881 7 r equest a sample may 2012, rev 2.0 table 5 ? 100k ecl dc characteristics 100k ecl dc characteristics (v ee = - 3.0v to - 3.6v, v cc = gnd) symbol characteristic - 40 c 0 c 25 c 85 c unit min typ max min typ max min typ max min typ max v oh output high voltage 1 - 1130 - 840 - 1090 - 840 - 1090 - 840 - 1090 - 840 mv v ol output low voltage 1,2 vcrtl = vref. boost =vee - 1950 - 1700 - 1950 - 1700 - 1950 - 1700 - 1950 - 1700 mv v ol output low voltage 1,2 vcrtl = vcc. boost =vee - 1200 - 940 - 1190 - 940 - 1190 - 940 - 1190 - 940 mv v ol output low voltage 1,3 vcrtl = nc. boost =nc - 1900 - 1640 - 1890 - 1640 - 1890 - 1640 - 1890 - 1640 mv v ref reference voltage 2 boost=vee - 1650 - 1450 - 1650 - 1450 - 1650 - 1550 - 1450 - 1650 - 1450 mv v ref reference voltage 3 boost=nc - 1440 - 1320 - 1380 - 1260 - 1380 - 1260 - 1380 - 1260 mv i ih input high current - d 80 80 80 80 a v ctrl 400 0.5 400 0.5 400 0.5 400 a i il input low current 0.5 0.5 0.5 0.5 a i ee power supply current 20 26 35 21 27 36 22 28 38 25 31 41 ma 1 each output is terminated through a 50 ? resistor to v cc - 2v 2 boost is internally bonded to v ee for the msop8 packages 3 supported in mlp16 package only
arizona microtek, inc. az 10 /100 ep16 vs ecl/ pecl differential receiver with variable output swing www.azmicrotek.com +1 - 480- 962- 5881 8 r equest a sample may 2012, rev 2.0 table 6 - 100k pecl dc characteris tics 100k lvpecl dc characteristics (v ee = gnd, v cc = +3.3v) symbol characteristic - 40 c 0 c 25 c 85 c unit min typ max min typ max min typ max min typ max v oh output high voltage 1,2 2170 2460 2210 2460 2210 2460 2210 2460 mv v ol output low voltage 1,2,3 vcrtl = vref. boost =vee 1350 1600 1350 1600 1350 1600 1350 1600 mv v ol output low voltage 1,2,3 vcrtl = vcc. boost =vee 2100 2360 2110 2360 2110 2360 2110 23660 mv v ol output low voltage 1,3,4 vcrtl = nc. boost =nc 1410 1660 1410 1660 1410 1660 1410 1660 mv v ref reference voltage 3 boost=vee 1650 1850 1650 1850 1650 1850 1650 1850 mv v ref reference voltage 4 boost=nc 1860 1980 1920 2040 1920 2040 1920 2040 mv i ih input high current - d 80 80 80 80 a v ctrl 400 0.5 400 0.5 400 0.5 400 a i il input low current 0.5 0.5 0.5 0.5 a i ee power supply current 20 26 35 21 27 36 22 28 38 25 31 41 ma 1 for supply voltages other than 3.3v, use the ecl table values and add supply voltage value 2 each output is terminated through a 50 ? resistor to v cc - 2v 3 boost is internally bonded to v ee for the msop8 packages 4 supported in mlp16 package only
arizona microtek, inc. az 10 /100 ep16 vs ecl/ pecl differential receiver with variable output swing www.azmicrotek.com +1 - 480- 962- 5881 9 r equest a sample may 2012, rev 2.0 table 7 - ac characteristics ac characteristics (v ee = - 3.0v to - 3.6v, v cc = gnd or v ee = gnd, v cc = +3.0v to +3.6v) symbol characteristic - 40 c 0 c 25 c 85 c unit min typ max min typ max min typ max min typ max f max max toggle frequency 4 >4 >4 >4 >4 ghz t plh /t phl propagation delay to output 100 160 240 100 160 240 100 160 240 120 190 280 ps t skew duty cycle skew 1 5 5 20 5 20 5 20 ps v pp minimum input swing 2 150 150 150 150 mv v cmr common mode range 4 v ee + 2.0 v cc v ee + 2.0 v cc v ee + 2.0 v cc v ee + 2.0 v cc v a v small signal gain 4 db t r /t f output rise/fall times q (20% - 80%) 120 170 130 180 130 180 150 200 ps 1 duty cycle skew is the difference between a t plh and t phl propagation delay through a device. 2 v pp is the minimum peak - to - peak differential input swing for which ac parameters guaranteed. 3 the v cmr range is referenced to the most positive side of the differential input signal. normal operation is obtained if the high level falls within the specified range and the peak - to - peak voltage lies between v pp (min) and 1v. 4 differential input, differential output. 240 ? to v ee on q/q outputs, v ctrl = nc and boost = v ee (for mlp 16 package). 5 see figure 2
arizona microtek, inc. az 10 /100 ep16 vs ecl/ pecl differential receiver with variable output swing www.azmicrotek.com +1 - 480- 962- 5881 10 r equest a sample may 2012, rev 2.0 p ackage d iagram msop 8 green/rohs compliant/pb - free msl=1
arizona microtek, inc. az 10 /100 ep16 vs ecl/ pecl differential receiver with variable output swing www.azmicrotek.com +1 - 480- 962- 5881 11 r equest a sample may 2012, rev 2.0 p ackage d iagram mlp16 green/rohs compliant/pb - free msl=1 arizona microtek, inc. reserves the right to change circuitry and specifications at any time without prior notice. arizona microtek, inc. makes no warranty, representation or gua rantee regarding the suitability of its products for any particular purpose, nor does arizona microtek, inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. arizona microtek, inc. does not convey any license rights nor the rights of others. arizona microtek, inc. products are not designed, intended or authorized for use as components in systems i ntended to support or sustain life, or for any other application in which the failure of the arizona microtek, inc. product could create a situation where personal injury or death may occur. should buyer purchase or use arizona microtek, inc. products for any such unintended or unauthorized application, buyer shall indemnify and hold arizona microtek, inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorn ey fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that arizona microtek, inc. was negligent regarding the design or manufacture of the part.

▲Up To Search▲

Price & Availability of AZ10100EP16VSLG

	To Download AZ10100EP16VSLG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .